Window. Doors. Partitions / | Angle and telescopic sliding doors |
Features sliding doors
With its elegant design, the sliding doors give the interior apartment elegance and modernity, and the unique design allows significantly save space in the apartment.
sliding doors can be used as a partition between the living room and kitchen, in case of need you can instantly transform the two rooms into one. In addition, the sliding doors - this is the optimal and cost-effective solution for the decoration of the entrance to the building or premises. The main prerequisite for the installation of these doors is the availability of space at the wall where the leaf will disperse. Opening the sliding automatic door sensor signal is carried out by using an electric drive. As the sensor commonly used radars, infrared sensors (active and passive), contact mats.
Recently there radar, determining the direction and speed of movement of the person by means of two cameras, which eliminates false triggering of the automatic door when a person enters a zone of the sensor, moving, for example, parallel to the plane of the door. Also, the door can be activated using a button or switch. Automatic doors have a photocell, which detects the presence of " subjects " between the door leaf, and holds them in the open state as long as the opening is released. Opening and closing the valves is driven, programmable special programmer. Programmable opening and closing speed, the rotation of the motor, the delay in the open state, the lock function.
Corner sliding doors
Drive for a door has a gear that allows the belt to change the orientation from horizontal to vertical, and leaf is turning to the profile. When the decision to install corner sliding doors should pay attention to the fact that the standard solar cell is not suitable due to lack of the plane, as well as solve the problems pairing the corner flaps and housing in order to lower the heat loss. Round (semicircular) sliding doors - this is a special case of segmental door. The arc angle of the door leaf can be up to 180 degrees.
Telescopic sliding doors
Telescopic sliding doors have two carrier profile and a telescopic drive operates four instead of two doors. The opening of the door does not open at the half and two-thirds of the opening, due to the fact that apart from the four to six leaf. In winter, the door can be opened to incomplete opening width - winter mode. Most recently, the mass production of automatic sliding doors have appeared with the number of wings, which is necessary to cover the required width of passage. When approaching a person to open the door sash those who need to pass the person.
Tilt-sliding automatic doors are ideal for installation in existing narrow openings. The flaps of the doors are fixed to the rotating drive consoles. A rail mounted in the floor and have an arc of a quarter circle cutout. If you turn off the power, the sash can be opened from the inside by hand, as the swing doors that meet fire safety requirements.
Single-wing sliding doors are opening to the left or right to the wall or fixed sash and double-opening of both wings of the wall or fixed sash. Bearing Profile doors are made of aluminum profiles. For the manufacture of doors, there are systems of aluminum profiles. Most suppliers of automatic control and produce your own profile system in which all thought contiguity, guides and seals are provided.