Information about the diamond tool

Diamond tools is widely used in construction. Its popularity is due to a number of advantages that are unique to him. Working with this tool, in contrast to the   perforation and demolition equipment, takes place without much noise and vibration, which preserves the integrity of the   structures and non-irritating to the ear. The surface of the cut with a diamond tool holes smooth and level, it needs cleaning and polishing.

The diamond tool consists of two main elements: a steel hull and rich diamond segment. Method of attachment of the latter may have different options: a segmented edge, solid edge serrated edge or one-piece segment is integral with the body of the blade.

Housing disc is a plate of specially treated and hardened steel of very high quality. Usually segments are placed on the teeth, between which there are hollows. They are also called slots. They contribute to the cooling of the cutting disc, allowing the water (wet cutting) or the air (dry cutting) to pass between segments. They also allow the disc to flex to a certain degree during cutting. The segments consist of a sintered mixture of metal powder and diamond.

During manufacture, a mixture of metal powder and diamond is formed at a very high temperature to obtain a solid metal alloy retaining diamonds. The segment or segment body edge is slightly wider, so that the penetration of the cutting edge into the material of the steel has almost no wear.

In the diamond tool properly matched to the material to be processed, there is an optimal balance between work and diamond abrasion ligament; Diamond held before destruction, and then exposed the new crystal. It is from this balance depends on the quality and life of the diamond tool.

Diamond blade designed for cutting hard dense (low abrasive) materials requires a softer metallic binder. It wears out sooner rather quickly replacing the worn diamonds, so that the drive continues to cut. Disks for cutting soft abrasive materials require a hard wear-resistant ligaments that hold the diamonds longer.

How does the diamond tool?

1.   The diamond tool does not cut, and grinds the material being processed. In the process of honing tool factory individual diamond crystals on the working and the side surfaces of the segment are exposed, and that they are " work ". Also used a specially designed self-sharpening segments. Metal bond holds the crystals from falling out. In the process, the diamonds are kept even " tails ", comets arise directly behind the crystals and the effect of reinforcing the retaining ligaments.
2.   Open so diamonds cut into the material, turning it into a fine dust.
3.   In the course of cutting open diamonds may crack or break (the faster, harder and denser the material).
4.   At the same time begins abrasion metal bond segments of the processed material.
< br /> Price

Decide what is more important: the cost of buying a tool or cutting costs. For less demanding applications, and when used on occasion to do this may be a cheaper tool. To perform more demanding jobs or regular use, preferred a more expensive tool with low costs for cutting, as it provides the best results and performance.

Processed material

The most important factor in choosing the right tool is the definition of the material to be processed. From the material directly affects the speed of cut and tool life.

Dry or wet cutting?

This choice may depend on the preferences of the user or any specific restrictions related to work performed. When the concrete is wet cutting is preferred, since it is cooled by a tool that allows you to increase the depth of cut and extends the service life of the tool. In the case of stone-cutting machines and Tile can be equally well used tools for dry and wet cutting. The universal cutters on site most commonly used tool for dry cutting. Wet cutting is mainly used to reduce dust and to cool the tool. When dry cutting with powerful hand carvers heartbeat occurs, try using a wet cutting. Wherein the cutting disc is cooled, which contributes to eliminating this problem. Tools for dry cutting can be used both to feed and water supply without depending on the machine and material to be cut

Diamond tools German company CEDIMA GmbH, producing diamond tools and equipment since 1984 , easily cut a hole nearly any diameter and thickness of the walls and ceilings, and also carries out cutting dimensional structures (bridges, foundations, etc.), requiring a large area and the amount of cutting. When working with diamond technology significantly increases productivity, and at the same time provides maximum safety for humans. Today, based on its own produced segments, diamond drill bits, diamond discs, cutters, cups, ropes and other tools.

 Company “ TSEDIMA » It provides customers with any equipment necessary for the use of diamond tools : by dry drilling machine for installation of utilities to fully hydraulic floor saws for road construction. The extensive range of the company includes stone cutting machines, floor saws of various sizes and designs, hand drilling machines and drilling machines with racks, Wall saws and wire saws with hydraulic or high-frequency power, floor grinding machines, surface milling of concrete roadway and more .