Furniture and interior / | Facing materials with 3D effect in the interior |
Three-dimensional technology in demand not only in the film industry, but also in everyday life. Manufacturers of construction materials do not get tired to please consumers innovations: 3D materials create a full « immersive », this is not a crazy experiment, and the unusual and stylish design solution. What 3D materials are most popular? – let's deal.
3D Image interior
Basically it is a Mural decoration material with well-drawn texture. The advantages of three-dimensional wallpaper lot:
They are practical, resistant to moisture, dirt and sunlight;
- Easy to clean (thanks poliestirolu, which is a part);
- Fire – is applied to the surface of a special primer asbestos;
- The method of pasting does not differ from conventional counterparts;
- And finally, they are beautiful, and looks impressive.
Plots may also be different: Children – colorful cartoon animals, bedroom – tranquil scenery, for the living room – abstraction, large prints, Kitchen – still lifes, Bath – Water theme.
There is one « »: but the wallpapers do not look good in small spaces: their entire spatial effect is simply lost, you get a beautiful and bright picture with no claim to victory.
Quality illusion famous designers have long been brought to a new level: there are fluorescent wallpaper, are under the influence of the lamp with a special spectrum of a normal picture turn into a panorama. Not so long ago appeared elektrooboi – they can be controlled, they show simple animations. The principle of the producers kept secret, but enterprising craftsmen have found that such multilayer wallpaper, and one of the layers – This foil, which conducts electricity well. There are also fabric wallpaper with LEDs, you can change the configuration of the light and the image at its discretion.
From the latest innovations, we note volume wallpaper with porcelain elements, as well as thermal wallpaper. They are covered with a special paint that reacts to temperature rise: painted green turns into buds, and as the heating and flowers. Unusual and not a cheap solution, but if you want it to experiment.
The three-dimensional ceramic tiles
Not so long ago there was a collection of tiles chameleon. It not only three-dimensional, but the ability to change color depending on the angle of incidence of color. The 3D effect is achieved through micro-lens technology. Polycarbonate is a few layers, the latest – reflective and protective. There are tiles « liquid », they are completely sealed and kept a lot of pressure and composition inside can blur and form bizarre shapes or abstractions. However, in most of the apartments can be found normal « frozen in space » tile.
Naturally, for external works such tiles are not used to mount it a little more complicated: you have to cut with special tools and dose load.
Floors with a 3D effect
They have appeared not so long ago, but has already gained popularity. In fairness it should be noted that the bulk three-dimensional flooring look good only on a large space: the bathroom meter on where in one corner stands a bath, the other a washing machine, and between them is a piece of space dolphins or funny starfish will look shabby .
The secret of the three-dimensional image is simple: on sale is a special film with a ready 3D image. They are the basis of sex, and the top covered with a polymer mixture. The coating forms a strong, glossy, resistant to abrasion and fading. If desired, in this way, you can decorate the facades of furniture, walls and other surfaces.
Decorative 3D panel
They became the prototype of the bas-reliefs that our ancestors carved in stone. In fact, the panel – three-dimensional puzzle that is easily and quickly installed and is highly resistant to wear. Following the development of a design project, a blank computer – it is applied to the product merely decorate the panel and then applied on them a protective coating. The panels may be made of:
- Plywood and MDF;
- Gypsum;
- Wood, including bamboo stalks;
- Polymer composites;
- Metals;
- Glass;
- Acrylic or normal glass;
- Artificial stone;
- Textiles;
- Skin (simulation can be used as a normal PVC film).
The cost of the product is directly proportional to the quality of the base material, the price is also affected by processing technology, the complexity of ornament known brands.
In favor of the relief panels it is worth noting that they are universal, suitable for any room. Beautifully decorated with wall defects, zoned space, are a striking accent. Durability – 50 years or longer, they are not afraid of sunlight, moisture, mechanical shock. Mounted to the glue or special corners, well retain heat, provide sound insulation.
Panels should not be much if you are finished with them and the walls and ceiling – room oversaturate textures, it will tire you and annoy. There are three-dimensional panels have another disadvantage: in these hollows and protuberances going fine dust. Frequent wet cleaning – not your strong point? – better to abandon expressive drawings.
You can choose any style panels: metal and glass blends in well with the style of hi-tech, minimalism, gypsum – with classics and Baroque, Leather – to ethnic, African, Moroccan styling, bronze and metal – to Art Deco, Art Nouveau. You can enhance the play of colors with the help of LED lighting (spotlights, LED lights, side lights) – It will emphasize the depth of the picture.
As you can see, almost all the three-dimensional surface can be done, but overdoing it is not necessary, because the best – enemy of the good. The overabundance of textures and patterns can be a design error rather than a twist! Experiment, and you will succeed!
See also:
- Wall panels for the kitchen.
- Mirrors and interior design.