About Us Contact Us
  • Repair of buildings
  • Design
  • Ceilings
  • Building materials
  • Floor coverings
  • Window. Doors. Partitions
  • Furniture and interior
  • Construction and Infrastructure
  • Concrete
  • Facade systems, siding
  • Adhesives. Insulation materials
  • Air conditioning and ventilation
  • Roofing materials
  • Drainage systems
  • Paints and varnishes
  • Stairs
  • Steel structures
  • Heating
  • Lumber
  • Tile. Granite. Marble.
  • Plumbing. Water supply. Sewage
  • Security systems
  • Glass
  • Loose and binding materials and mixtures
  • Instruments
  • Machinery and equipment
  • Electrical
  • Drainage systems /

    Drainage systems of stainless steel

    Various human waste for centuries removed in different ways. The simplest and most effective way to become ancient times hydroremoval – removal of waste water flow. However, the content of domestic and industrial waste water of organic substances that serve as a favorable environment for the development of various microorganisms, calls for the withdrawal of their   outside buildings and settlements. And solve the problem of high-quality organization of drainage systems.

    Removal of waste water is especially important for the food industry, catering and domestic services. Reliable drainage system to help   ensure working conditions that comply with all health and safety standards developed specifically for these companies.

    Given the high demand for products for drainage systems, the company « hydronic » It expanded its operations by setting up production of a wide range of stainless steel products. An important role for the production of trays and ladders for the transport of waste water into the sewer.

    Drainage trays made of stainless steel

    Drainage trays of stainless steel are widely used both in the food industry and catering, as well as swimming pools, saunas, car parks and petrol stations. Products designed for wastewater to the ladder, and sometimes directly into the sewage system, installed in the floor space. The presence of such a system helps to maintain cleanliness during the production process and simplifies cleaning after its completion.

    Externally drainage trays, stainless steel look as channels of different width and depth. The bottom is configured such that its two half converge at the center at an angle. This design solution prevent clogging of chutes and formation of bacterial plaque. In addition, the trays have a bias that increases the rate of removal of water and the efficiency of the entire system. The initial depth of product ranges from 60 to 90 mm, the final — from 100 to 300 mm at the maximum section length of 2.5 m. By the width of the trays may be from 100 to 400 mm.

    Installation of the system is carried out only by specialists – by welding stainless steel gas-shielded consumable electrode. The results obtained in the course of the joints undergo etching and stripping. For protection against clogging drainage system equipped with nodes capture of mechanical impurities, which must be cleaned by hand. Safety of people working in manufacturing is achieved by setting the trays on top of covering gratings with locking devices of the displacement and theft.

    Depending on the operating conditions, products made of steel two brands - AISI 304 and AISI 316L. The first provides durability and reliability in the mainstream, and the second is used for the production of products resistant to acids.   Material thickness 2 mm to withstand severe mechanical stress and temperature changes, and mortgage « whiskers », placed on trays every meter, increase the stiffness of the whole structure. However, if you have the opportunity to further strengthen the system – For this the company « hydronic » enjoy special metal corners.

    slotted trays made of stainless steel

    In places where it is impossible or inconvenient to hold the system of drainage trays, slotted trays used in stainless steel. They are less in width and do not require special grids, but the effectiveness of their work, no less than in the organization of conventional drainage systems. Slotted trays of stainless steel are produced from two types of steel, they can be used on any plants. The open design of the tray is suitable for permanent control over its contents: all the pollution affecting the rapid removal of waste water can be easily removed when necessary.

    Installation of these products is carried out without the use of gas-shielded welding: for this there are flanges with silicone gaskets. Such a system installation significantly reduces labor costs and installation time, and this is particularly important when there are time constraints.

    floor drains stainless steel

    the chute trays waste water transported to the ladders – articles connected directly to the sewer. However, stainless steel ladders can be used separately from the trays and installed in the ground water collection point. These products are containers having elements for connection to the sewers – issues.
    Stairs are made of stainless steel   in two ways – with horizontal and vertical outlet, so they are suitable for installation on all enterprises, including the existing sewerage system.

    As trays, ladders are made of two kinds of steel – normal in AISI 304 and acid-resistant AISI 316L. Top special ladders locked gratings with locking devices that prevent the ingress of foreign matter into the tank and prevent occupational injuries. However, thanks to user-friendly design, they do not impede access for periodic cleaning of products from small contaminants.

    Options

    In order to increase the efficiency of the reception systems and sewage company « hydronic » Additional accessories are available, such as a device for trapping solids and hydraulic locks.

    First, as the name implies, prevent the ingress of coarse particles into the sewer waste and foreign objects. These metal products are produced in the form of sieves, which can be easily removed from the ramp and cleaned manually.

    water trap designed to keep the odors inside the drain and preventing their dissemination directly to the room. The use of these devices actually everywhere, but they are especially important in the food, pharmaceutical and perfume industries. Hydraulic lock, manufactured by « hydronic » suitable not only for its production of ladders, but also to many others, including the already established enterprises.

    System for receiving and wastewater, made of stainless steel – convenient and reliable solution for hydroremoval waste. High strength, resistance to aggressive environments and reliability enable you to quickly and effectively solve the problem of sewage disposal. High-quality stainless steel products can be used for a long time – battery life under normal use up to   50 years old, and it's a very good sign! The problem of wastewater has been solved for a long time, and now it decided to improve the company « hydronic ». Installing drainage system of its production, you will get excellent results!

    In addition to systems for receiving and wastewater, the company manufactures and other equipment made of stainless steel: hygienic access system, contactless washing, washing systems for aprons and shoes, hiking disinfection baths, grease traps. The use of these products at the plant will allow it to comply with all health and safety standards, and in addition, increase the comfort and safety of his employees.

    © 2015-2022, Help-repair.info
    Copying of information only by using open links
    mobile version