Building materials / | Building profile. How to avoid mistakes when selecting a building profile |
Today it is hard to imagine without drywall repair. With these light, environmentally friendly sheets easily erected new walls, cladding and there hang suspended ceilings. However, the reliability of the new design will directly depend on the quality of building profile , which are mounted plasterboard.
Recently, the issue of quality building profile are concerned not only consumers but also producers of building materials. This is largely due to the fact that the market is « littered » by-night manufacturers who care only about short-term profits, without much bothering to issues of quality of their products. Using a thin, unsuitable for the production of steel profile, they offer products at a price lower than the big companies.
Often under the guise of galvanized steel they sell cheap profile of electrolytically galvanized. While the density of the zinc coating galvanized steel is not less than 180 g/m2, coated electrolytically galvanized the whole 80g/m2. This material is intended solely for painting, so after a while about what they do not know the owners are faced with inevitable consequences of their choice – corrosion. At best, it shows through the wallpaper rusty spots, in the worst – It leads to a thinning of the metal and the collapse of the whole structure. Especially dangerous is the use of such low-quality profile in areas with high humidity.
To distinguish a quality building profiles of low quality simply enough. Squeeze the hand cheap profile and then compare it with the fact that expensive. And then calculate the weight of the planned construction of & hellip;
Regarding the profile of electrolytically galvanized steel, it is easy to distinguish by eye. While hot-dip galvanized glistens in the sun, the profile of electrolytically galvanized steel dull, dim. But in selecting a profile in the priority should not be the price, and quality, because the consequences of buying low-quality profile commensurate with imaginary savings on the price.
Opting for cheap, but a thin profile may result in serious losses for the business. Today in our country come to foreign investors who are ready to invest in construction. According to Western practice, they are used to cover all possible risks: fire, collapse, etc. However, the insurance companies refuse to insure the building, which was used in the construction of low-quality, non-certified materials. Many face this already upon completion of construction, when the correct position is too costly. And such cases in the practice is not uncommon for a long time.
The only way to avoid this situation – buying a certified profile from a reputable manufacturer. Opening the proceedings, the company has set a goal: to produce only high-quality profile. For the production of modern high-tech equipment purchased that meets the requirements of international standards. As raw materials the company uses only the hot-dip galvanized steel major metallurgical plants.
In this profile you find six-millimeter holes, longitudinal corrugations and perforation, essential when installing the profile frame. A hole in the form of a butterfly are comfortable in conducting electrical wires: it is securely fixed in a narrow part of the holes, which significantly extends the life of electrical wiring.